ED RAICHERT, INC INDUSTRIAL SEWING EQUIPMENT  EriCompanySite
ERI
JUKI INDUSTRIAL SEWING MACHINES TO SEW COMMERCIAL APPLICATIONS

juki dnu1541 picjuki high liftrectangular feed Juki dnudnu1541

Did you buy one off the internet and need assistance? Please call our service department we are glad to assist you. We are JUKI distributors and know this machine and can help dial it in. Using Tenara thread? We can make it work.

Juki DNU1541
Set up, training,  in Phoenix area included.

delivery extra cost

Please call for price

DNU-1541/& DNU-1541S All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out. Also available with safety clutch. DNU-1541S

To Order Call: 602-272-2301

UPHOLSTERY EQUIPMENT

WALKING FOOT NEEDLE FEED

The purpose of using a needle feed walking foot machine to sew upholstery is to have even feeding. When sewing multiple layers of material it is best use a machine that feeds top and bottom so that all layers of material come out even. If a machine is used that only feeds from the bottom (drop feed) then the bottom layer will feed faster then the top. This will result in puckers and in the case of sewing welt cord will create a “roping effect” where the piping will be twisted. Since sewing upholstery also involves crossing over thick seams and often requires “back tacking” the needle feed walking foot performs this effortlessly. Juki tends to sew superior seams due to the square motion feed and unique high walk mechanism designed into all 1500, 2200, and 1340 series machines. This combination ensures high quality stitching while changing material thickness that is better then an elliptical feeding type machine.

JUKI HAS UNIQUE FEATURES THAT BEAT THE COMPETTION WHEN SEWING HEAVY MATERIALS

New High Performance Juki Walking Foot Machines now has unique features that no other machine has! New features allow the sewing of heavier materials, with better quality stitching, easiness of operation and maintenance. Pursuing the highest machine performance Juki has improved and or newly created many exciting features.

Rectangular feed motion. This motion allows the feed to come up straight while needle comes straight down. Short and irregular stitches are almost eliminated. Also feed travels a longer distance then other machines “elliptic” motion while above the throat plate. Vertical movement of the feed is kept to a minimum allowing quietness and stability even at high speeds

Improved triangular walking foot mechanism. This triangular design lets both feet walk and lift evenly regardless of the thickness of material. Most other machines only retain 2% of the original lift when sewing on 10.8 mm of material. (3/8”)

Top point swing needle rod rocker system. This allows rocking force at a lower position, closer to the needle, than a central point system on other machines. Plus, a fulcrum located at the top lets the needle stand as vertical as possible, which adds to stitch accuracy.

Rocking base guides. These prevent against any play so that correct feeding performance is promised

Durability. Larger shafts diameters have used so highest rigidity is achieved.

Ball bearing used in various positions to contribute to long time service.

3 Point holding of upper shaft. This allows torque to be correctly dispersed to avoid concentration to a single point, contributes to quietness and long life service.

Large Handwheel. Increased ease of sewing and needle penetration.

Stitch regulating dial.

Appearance. New design allows greater visibility.

Built in Bobbin Winder